Rich_hard1
New Member
Could I please get some advice to avoid screen tearing using OBS projector mode.
Using a 4k screen as the main monitor and a 1080p monitor to project the 4k output, using a hdmi splitter to split the signal to a 2nd PC where OBS captures the output via a capture card at 1080p and 60fps.
1st PC = I7-4790K - 2xR9-295x2 - 16GB2400MHz - 1500w - PB287Q - VS247NR - G502 - A50 - PC350SE - G19s - Fiio E7
Z906 - Omni 5.1 - XenyX502usb - AT2050 - H105 - Oculus/TrackIR/G27
2nd PC = I7-4790K - GTX980TI - 16GB3000Mhz - VS247NR - Essence STXii
Thankyou.
Using a 4k screen as the main monitor and a 1080p monitor to project the 4k output, using a hdmi splitter to split the signal to a 2nd PC where OBS captures the output via a capture card at 1080p and 60fps.
1st PC = I7-4790K - 2xR9-295x2 - 16GB2400MHz - 1500w - PB287Q - VS247NR - G502 - A50 - PC350SE - G19s - Fiio E7
Z906 - Omni 5.1 - XenyX502usb - AT2050 - H105 - Oculus/TrackIR/G27
2nd PC = I7-4790K - GTX980TI - 16GB3000Mhz - VS247NR - Essence STXii
Thankyou.